Multiple signal triggers

[Paul45011]

I've been trying (unsuccessfully) to set up a Digital Discovery to trigger when multiple conditions are met. I've tried using the Pulse options but I can't see a way of linking multiple signals so I guess I need to use a script.

Basically, I want to detect a 960ns pulse on DIN6 and, after it has been detected, trigger if any of four signals (DIN 1, 2, 4 or 5) fails to transition high to low within +/- 30ms.

Could someone point me to a sample script that I can use as a starting point to do this?

[attila]

Hi@Paul45011

Such trigger sequencing is not supported but it could be done with software validation.

With a setup and Script like this:

Logic.run();while(Logic.wait()){// exit on Stopvardata=Logic.Channels.Bus.data;if(data[data.length-1]!=0){// last sample not zeroprint("last Bus sample not zero");break;}}

or with conditional export:

if(Index>Maximum)return;vardata=Logic.Channels.Bus.data;if(data[data.length-1]==0)return;// do not saveLogic.Export("~/Desktop/logic/acq"+Index+".png");Logic.Export("~/Desktop/logic/acq"+Index+".csv","Raw Data");Index++;